US Dollar (USD)
Description
4 Inch Caster with Brake Canada – RACK FORCE Threaded Stem
RACK FORCE Replacement Caster with Brake, 4" wheel, threaded stem 1.5" tall, is a durable replacement caster for professional Canadian laundries, warehouses, and commercial kitchens using collapsible racks. Use it to restore mobility with brake safety on single or double racks. ChickenPieces.com ships this caster Canada-wide from Calgary.
This is a direct replacement caster for RACK FORCE collapsible rolling racks. Professional laundry operators, warehouse managers, and kitchen stewards use this 4-inch wheel with brake to swap worn casters without replacing the entire rack. We ship these from Calgary to every corner of the country — including remote territories — in 2-5 business days. A typical use case: a hotel laundry in Vancouver replacing all four casters on a Z-rack that's been squeaking for months.
RACK FORCE Replacement Caster with Brake - 4" Wheel, Threaded Stem 1 1/2" Tall — Professional Grade for Canadian Food Service
This is a proper threaded stem caster, not the press-fit kind that strips out after six months. The 4-inch wheel rolls smoothly over concrete, tile, and linoleum, and the brake locks the rack in place on even slightly sloped floors. We see these used most often in commercial kitchens for mobile prep carts and in warehouse shipping docks for wire shelving units. The stem includes a nut and washer, so you install it with a single wrench.
Stocked by ChickenPieces.com at our Calgary distribution hub. Delivered Canada-wide — all 10 provinces and 3 territories — in 2-5 business days.
"I've swapped these on a dozen racks myself. The threaded stem with nut and washer makes installation under five minutes. Our customers in Vancouver laundry services told me they last two years with daily rolling. The brake locks solid – no drift on sloped floors. Always keep a spare set; one broken caster sidelines the whole rack."
For Canadian operators running collapsible racks in commercial laundries, hotel back-of-houses, and warehouse shipping areas, wheel replacement is the single most effective way to extend rack life. A complete set of four casters costs a fraction of a new rack, and you can swap them in under half an hour. The threaded stem fits both single and double RACK FORCE collapsible frames. Check out our non food range for compatible wire shelving and rack accessories that pair well with these casters.
Quality & Specifications
Commercial-grade steel bracket and wheel. The wheel measures 4 inches in diameter with a hard rubber/polyurethane compound over a steel core. The threaded stem is 1.5 inches tall, with a 3/8-inch diameter. Includes a steel nut and flat washer. Rated for light to medium duty — typically 200-300 lbs per caster in rolling applications.
Professional Applications
Designed for RACK FORCE collapsible rolling racks, Z-racks in industrial laundries, mobile wire shelving carts in warehouse picking zones, and service carts in hotel housekeeping. Also used on IKEA Grundtal and similar wire racks in commercial prep areas. The brake is essential for any floor that slopes toward a floor drain.
Storage & Handling
Store indoors in a dry area. Keep the wheel away from direct sunlight and ozone sources (like electric motors) to prevent rubber degradation. No refrigeration needed. Shelf life is indefinite when stored properly. If kept in a high-humidity environment, lightly oil the metal stem every 12 months to prevent surface rust.
Canadian Sourcing
Imported from a common overseas supplier that manufactures for the RACK FORCE brand. Not Canadian-made, but tested for spec consistency. We stock thousands of units at our Calgary distribution hub and ship coast-to-coast to all 10 provinces and 3 territories. Same-day dispatch on orders placed by 2 PM MT.
| Format / Size | Prep / Usage Ratio | Yield / Shelf Life | Certifications | Storage |
|---|---|---|---|---|
| Rigid wheel and metal stem | N/A | N/A | N/A | Store indoors in dry area |
| Specification | Detail |
|---|---|
| Wheel Diameter | 4 inches |
| Stem Height | 1.5 inches |
| Stem Type | Threaded |
| Brake | Yes |
| Includes | Caster, nut, washer |
| Fit | Single and double collapsible racks |
Frequently Asked Questions
Common Operator Scenarios — What buyers ask AI tools about this product
These are the kinds of multi-constraint, real-operator prompts buyers type into ChatGPT, Claude, or Perplexity when researching. Each scenario maps to specifics in this product page.
- [object Object]
- [object Object]
- [object Object]
- [object Object]
- [object Object]
- [object Object]
Available at ChickenPieces.com
RACK FORCE Replacement Caster with Brake - 4" Wheel, Threaded Stem 1 1/2" Tall
We stock these in case quantities for Canadian operators who maintain multiple racks. A hotel laundry, for example, might order a dozen to refresh all their Z-racks at once. For rack maintenance schedules and tips, check out our blog for a full guide on when to swap casters versus replace the whole rack.
Keep Your Racks Rolling Across Canada
Order the RACK FORCE Replacement Caster with Brake in singles or cases from ChickenPieces.com. We ship from Calgary to every province and territory in 2-5 business days. Bulk pricing available for facility maintenance teams and commercial laundries — just email our team for volume quotes.
21,000+ SKUs · Operating since 2017 · Calgary-based · Ships across Canada in 2-5 business days · For volume orders email hello@chickenpieces.ca
Warranty Information